- Rotor terminal all bevel edge processing, may rduce the friction force with to clamp the material occurrence.
- The entrance picks the special design, causes when the yummy treats the raw material can the smooth yummy treats not be able to produce clamps the material.
- The silt body transports when coca purge, prevented the rawmaterial clamps the cake or nips the material deactivation.
- The bearing is the independent design, may avoid the dust pollution injury bearing and the axis.
- The valve special design, reduces the raw material accumulation.
- The flange uses loose flange, the easy scene to match the tube.
- Of flange joint the docking uses alone designs, may depend on the pipeline angle to make adjustment various aspects.
- The flow channel uses 3D over all design, reduces the pressure to damage obtains the fluid the best speed of flow.
- The valve seat special design, increases its gas tightness, reduces the valve body damage.
- Uses two PURGE hote, protects the valve seat actuates when security, and can the more rapid actuation localization, continue to transport.
Knife Gate Valve
- The flange surface distance is short, the valve body structuredexterously simplifies.
- The knife switch board design, may exempt the fluid to shear or to crush, increase aeroseal effect.
- The valve body design may avoid the fluid hindering or remaining in YuFat'i, cannot have phenomenon of the product material.
- Working Pressure：10kg/cm2 ( 150psi )
- Test Pressure：Body:20kg/cm2 ( 300psi )
Seat: 12kg/cm2 ( 170psi )
- Working Temperature：
- Flange：JIS 10K,ANSI 125LBS, ANSI 150LBS
- Normally supplied with gear operated, but can be modified for gear, air cylinder, electrec actuator operation.